5V & 12V SPINDLE AND VCM MOTORS DRIVER

You may have just registered here and may need to participate more to be able to use this feature. Let’s take a look on our “Guinea pig”. Finally we are going to see HDA from inside. During normal operation there is no interaction between the spindle and VCM drive circuits: Here is another picture of the slider You can clearly see heads contacts.

Uploader: Mezahn
Date Added: 21 January 2007
File Size: 35.80 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 67347
Price: Free* [*Free Regsitration Required]

5 lid itself is nothing interesting. The device is designed for 5V disk drive application requiring up to 2. Here is another picture of the slider You can clearly see heads contacts.

Google [Bot]Majestic [Bot] and 20 guests. And you also can the second magnet. The biggest part of HSA milled from piece of aluminum called the Arm. There is also small almost unnoticeable hole on HDA.

Now when nothing holding platters on the hub we are going to remove the top platter and next picture shows what we may see under. When TVS diode detects power surge it fries itself and creates short circuit between power connector and ground. It also contains the linear and PWM. This drive has parking area closer to the spindle and if power is not applied on a drive, HSA normally parked like on the picture.

  ACER 3820TG DRIVER

dpindle Please do not post me PMs, because i cannot answer yet I’m based on Portugal – Europe so if you are on Bulgaria you don’t have to worry about custom taxes.

It controls spindle motor rotation and heads movements. Because memory logically divided on buffer or cache memory and firmware memory. If any particle goes under the slider it could immediately overheat because of friction the heads and kill mootrs that’s why clean air inside HDA is so important.

Without such code drive wouldn’t even spin up.

Справочник ИТИС. Микросхемы управления двигателями. Motor drivers

Spindle Motor Driver The spindle driver features three 1-A, 2. The speed control of SPM isacts ad speed controller and it’s output becomes spindle output current set point.

It’s much easier and secure spinlde change pcb with a good working one and then swap the rom chip. During work HDD may create some very small particles of metal and oil inside. Now anr are going to remove top magnet to see what is under.

During normal operation there is no interaction between the spindle and VCM. The drive is detected by the OS but it cannot report anything. Any material to read and opinions are welcome.

  EDIMAX BR6204WG DRIVER

You may have just registered here and may need to participate more to be able to use this feature. Such a magnet is so strong it could lift up to times its own weight, so don’t put your fingers between magnet and steel or another magnet – it can develop great impact.

View topic – WD10JPCXUE4T0 overvoltage 12V instead of 5V

These grooves help a slider fly on the certain height. Such drives should have at least two shock sensors. During normal operation there is no interaction between the spindle and VCM drive circuits: Switch to mobile style. So after that the spindle doesn’t rotate, but clicking sounds from the heads?

Контроллеры двигателей (Motor Controller/Drivers)

The most demanding design constraint is size. One contact is for ground, other spundle for read and write elements. And the breath hole located right under the breath filter. Then it waits a while and spins up again, click click and gives up and repeat. Therespindle servos.

Start the discussion

Leave a Reply

Your email address will not be published. Required fields are marked *